bowtroll's Waterfowlin album on Photobucket
Showing posts with label Ultimate Camo. Show all posts
Showing posts with label Ultimate Camo. Show all posts

Sunday, August 14, 2011

Somebody check my PULSE













This Pulse is rapid.........rapid like 300fps!!!

Here is my 2011 Elite Pulse
I picked it up at Jefferson Archery and had Jeff come with me and give it the JLH treatment.
So after having only shot it a few times, here are my thoughts...

The look.... Ninja... Really sleek black look, fantastic lines and awesome machine work which is always the case with any Elite I have owned. Topped off with a set of Maryland Flag Gold strings and red G5 meta peep, the bow is a real looker.

The feel.... Smooth, Steady, and at the same time aggressive. Pulling the string back with ease, I forget that I have the bow set at 64 pounds. The draw cycle of this thing is the best I have had on any "speed bow".

The sound....

The performance.... Smokin'!!! at the shot you realize you just unleashed fury but you don't feel it. I was surprised to get the kind of speeds I was getting because to date any bow I could achieve these numbers with would remind me at the shot.

The set up.... I equipped the bow with a B-Stinger stabilizer.... Minimal weight on the end...the bow just points.
One of Vapor Trails Limb Drivers is on the shelf to cradle my Carbon Express Mach 5's
Then I added a Sword Site and one of Jeff's own P.O.S suppressors.

Here are the specs...27" draw. (Which feels 100% comfortable even though I have been shooting just over 26" for years)
64# shooting a 26 1/4" arrow weighing in at 328 grains.

Is giving me a blazing 300 fps!!! (Ok well the chrony at Jeff's said 298/299 but the one at Jefferson said 302.........once) So Im going with 300!!! Hey its a big deal for a stumpy armed guy like my self to get that kind of speed with that light a draw weight.

To say I am a fan of this new bow would be an understatement...I am a little sad though to see the GT500 I have loved so much be put on the bench. I am giving her a new set of strings and dedicating her to a life of 3D.

The best part of the set up that we are shooting on these bows is that I can jump right off of the 3D course and into the woods with nothing more than a swap of arrow points!!!

































































































Sunday, July 31, 2011

Tim Young is at it again!!!

I cannot wait to see the finished product on these two critters!!! These deer are featured stars on TOK season 3 "Community Service" Kevins big ole 9 point and my 5 year old freak!!! Tim asked what I wanted done with mine and I once again told him to have at it and surprise me... He only told me that the finished product will have a piece of habitat behind the wall pedestal form and I can only imagine what it will be from looking at the unfinished work!!!

















One look at kevins buck and you can see that it too is not an average form...I believe that this is the type of thing that will keep me going back to Youngs Wildlife for years to come... I am a big fan of knowing that there is not another mount out there like the one hanging on my wall...Tim will work with you on any idea you may have but I prefer to let the Artist work!!!

















To see these 2 bruisers in their all their finished glory come to the 2011 Buckwild Tri-State Hunters Expo in Boonesboro Md. this coming weekend!!!

Rogers Elite Pure

Roger began sending me picture of his groups in what seemed like minutes of him telling me he had picked it up...After a few days of this I got a review of this sweet shooter via email!!!

I decided on the Pure over the Hunter due to the Axle to Axle length. I am 6' 2" and weigh a biscuit shy of NFL offensive lineman. The Hunter felt like a toy in my hands while the Pure felt more like my Tour (Elites Target Bow), well balanced, smooth drawing and holds like a rock.

I purchased the 30.5" 70 pound Ninja. Fellow Team Overkill Member Chris Johnson had the 30" Pure. His felt short to him while mine felt long so we swapped out the draw elements. After some timing , draw weight and holding weight (draw stop) checks and adjustments I was ready to go.

I like having a 65% to 70% holding weight over the factory set 80%. Using a back tension release or even a thumb release used with proper back tension form, having the extra holding weight helps in your holding and release. Normally I shoot a 29.5" but with the 30" draw element adjusted down to 70% letoff it holds the same as a 29.5"

Now set with Hinky Strings, QAD Ultra Rest HDX (love these rests), 10.25" 11 ounce B-Stinger Stabilizer and my last year Sword 3rd Axis sight I was ready to start sighting in. I set the rest at the normal 7/8" up off the shelf and the 13/16" over for centershot. One shot through paper let me know I was on.

I shot one shot at 10 yards to make sure the sight was close then stepped back to 20 yards and shot 3 shoots (camera phone photo attached). All three were low left of center but touching. Great start. Easy to make sight adjustments when you can group like this. A slight adjustment was made to the whole pin housing then I stepped back to 40 yards (my middle pin) and shot one. Very close to center but still slightly low left, let's go back to 60 yards. At 60 yards I shot 2 shots, both touching just slightly low left (camera phone photo attached). Another slight adjustment and back down to 20 yards and shot again - dead nuts on. Nine total shots and I had the bow sighted in out to 60 yards - how easy is that!


























Next was the true test - broadheads - this is not a target bow - this is a hunting bow. I use 50 yards as my check (normally the max I would attempt to shoot at a deer, so if I am good here I should be better even closer). I shot 2 field points then 2 broadheads. The broadheads hit slightly right of the field points. I adjusted the rest slightly out (just a fraction), shot again and we were hitting in the same spot. Locked it down and have been practicing solid ever since. From my 2010 GT500 to the 2011 Pure I did not have to make any adjustments in the pin gaps. I am getting the same speed from the Pure as I was with my GT 500 hunting bow. The only difference I feel is the Pure has a smoother draw all the way to a solid back wall. The GT 500 had just the slightest bump, not bad but now with the Pure it is completely gone.

I am not a Speed Demon, I would rather have a bow that is easy to draw, holds great and does not feel like it is jumping out of my hand at the shot. The Pure has all of that. At 70 pounds and 30" draw I can easily hold this bow at a 45 degree downward angle and come to full draw with no problems. With the Pure I can focus completely on the shot and not the draw cycle.

My arrow setup is a 29" Carbon Express (CX) Maxima Hunter 350 with 3 Bohning Blazer Vanes, CX Bulldog Collar, CX Lazer Eye Nock and 100 grain Rage 2 Blade Broadheads. Total arrow weight is 400 grains. With shooting 290 fps I am obtaining 74.72 foot pounds of energy. More than enough for any whitetail around.

I loved the GT 500 last year (so much so I had two - one is still setup for 3D - the other has been setup by Jeff Harrison with Cuda Cams, Hinky Strings and 50 pound Ultimate Camo dipped limbs for my wife) but I think I have a new lover for the fall 2011. Still in the Elite family, just with the younger hotter sister of the GT 500. My wife is going to be a hunting widow again this year. As long as I can keep the nerves in check I should be easily filling freezers again this fall.
































































Thursday, July 21, 2011

New Covert Review

I have been so dissatisfied with my trail cams in the past. Now, to the other cams credit....I have never been one to spend a ton of money on what are supposed to be the best working models out there. I hear far to many horror stories on the forums of cams being stolen and the fact that where we do most of our hunting is in the suburbs has kept me from spending the coin on the top of the line models. I have always been impressed with the success folks have reported using Covert brand cams so when I saw a more affordable model I was ready to jump! I talked to Chip at Jefferson about the CA3.0 model and although he had never used one told me he could get them at a great price...I sold a few of my older ones and was in business so I ordered 3. Chip had them in no time and I hit the woods.

My first impression was that thing was tiny!!! I figured that would be fantastic to hide in the urban environment to protect from theft. The main reason that I was interested on this camera other than the small price tag was that it only uses 4 AA batteries!!! The cams I had been running before used anywhere from 4 to 6 D or C batteries and that puts a hurtin' on the wallet real quick!






























I was a little freaked out at first by the little ipod looking remote that it comes with. Each cam has one and it is required to set the cam up. I didn't like the idea of that at first as I have a tendency to forget or lose parts that I may need on a daily basis. However, once the cam is initially set up you don't need to use it again unless you would like to use the viewing feature (which is a tiny window, and that is not how I like to view anyway) or to check battery life. As of writing this I have had the cams for about 4 weeks and have checked them each 2 times. I still have over half the battery still remaining on the status meter.






























































I set the cams up in different type areas to see what kind of quality I would get from each environment. I put one in a yard that is very bright. This is the same yard that I missed a big buck in on the upcoming DVD so I was hoping to see that guy but no luck yet....Most of the pics from this cam were great during the day and in the evening and dark.
















































































I put another cam in a very dark poplar and scrub tree grove looking over a WYLD Mineral site. The pics from here were ok however a lot of the dusk and dawn pics were hard to see. Its like the cam didn't know wether to go infrared or not. I believe this is an typical problem with trail cams so I am not to bummed...













































The third I set up on another WYLD Mineral site. This is definitely my best WYLD site as it is getting hammered at all times of the day. The place looks like an elk wallow. (you cant see it in the pics because I have the cam sitting low on the ground as this is a heavily traveled cut through for neighborhood kids during the summer. The vegetation is thick but the spot is pretty open during the day making it a middle ground between the other two locations for my test. I got great pics of deer on the cams at all hours of the day. Unfortunately for me I don't see any of the big bucks that are in the area. Lots of doe and fawns so I guess it could be a great spot during the rut again as it was last season.





























All in all I am super pleased with my decision to get these cams and I am looking forward to seeing how far the batteries will go. I will have to report back on that. As of right now I think I may get a couple more of these if I can swing it before the season starts!!!